Thursday, May 24, 2012

One PIC Microcontroller Platform Development Board

One PIC Microcontroller Platform Development Board
Develop firmware using Microchip's 8/16/32-bit PIC® Microcontrollers all on one board!
Each device comes preprogrammed with firmware to operate the LCD, LED and capacitive touch pads. In addition to three PIC® Microcontrollers, this board also has a dedicated Real-Time Calendar Clock circuit and is able to run from a single AAA Ultimate Lithium battery.

PIC Microcontrollers
Capacitive Touch Pads
Segmented LCD

Colored LEDs
Single Cell Battery Supply
Real-Time Calendar Clock
1 MCP79410-I/S
PICkit™ 3 Connector
PICtail™ Board Connector

System Requirements:


·        MPLABX  V1.00
·        .NET Framework v2.0 or later (required for 8bit IR Demo GUI)
·        MCP2200 & SimpleIO-M.dll (required for 8bit IR Demo GUI)


·        MCP2200  (Downloaded)
·        ZENA Wireless Adapter (Provided)

Compilers ( use latest available versions):

·        PIC16 HI-TECH: (developed with v9.83)
·        PIC24 C30: (developed with v3.31)
·        PIC32 C32: (developed with v2.01)


This demo board is populated with 8bit, 16bit, and 32bit PIC microcontrollers. Refer to the schematic of the board for more details.
8 bit MCU : PIC16LF1939
16 bit MCU: PIC24FJ256GA106
32 bit MCU: PIC32MX795F512L

OnePIC Demo Board

The demo code consists of:
1.     A “base” code which demonstrates the
a.      LCD
b.     LEDS
c.      mTouch
d.     Potentiometer
e.      Switch
2.     Three Wireless Demonstrations, one for each PIC
a.      8bit – Infrared
b.     16bit – RF4CE (Radio Frequency for Consumer Electronics)
c.      32bit – WiFi

The following document is intended as a walk-through guide to using the provided software.  Items will be presented in the order they might be presented during a demonstration of the OnePIC board.

Download Schematic