OLED Display on NVIDIA Jetson Nano
On JetBot (JetBot is an open-source robot based on NVIDIA Jetson Nano.) It has 128x64 OLED and Connector. it's good idea for show something.
We can use 128x64 OLED Display. ( more popular in the market and low cost )
Wiring Diagram ( same Raspberry pi connector )
I2C connection pin
OLED Driver and samples from Adafruit
Install the Adafruit PiOLED 128x32 Monochrome OLED driver (3527)
Adafruit-SSD1306 library
https://github.com/JetsonHacksNano/installPiOLED
Reference
https://github.com/JetsonHacksNano/installPiOLED
https://custom-build-robots.com/top-story-en/jetson-nano-oled-display-ssd1306/12124
https://learn.adafruit.com/adafruit-gfx-graphics-library/using-fonts
Adun Nantakaew อดุลย์ นันทะแก้ว 081-6452400
LINE : adunnan
FaceBook : https://www.facebook.com/softpowergroup
Web Blog : http://raspberrypi4u.blogspot.com/